Watch the Video
Why Upgrade Your Remington 870 Receiver Pins?
If you’ve recently picked up a Remington 870 and want to add a clean, personal touch, swapping the factory receiver and trigger pins is one of the fastest upgrades you can make. Beyond looks, the right pins improve how the receiver feels during maintenance and add a functional anti-walk design that keeps everything locked in place. For enthusiasts who already run custom Glock parts or other firearm accessories, this is a natural next step in refining your shotgun.
What Makes NDZ Performance Receiver Pins Different
NDZ Performance designed these Remington 870 receiver pins with real-world use in mind. They’re machined from stainless steel and available in both stainless and gold finishes, giving you options that resist corrosion and hold up to years of range time or safe storage. The standout feature is a deeper anti-walk notch. Compared to standard OEM pins, this notch provides a more secure lock, so you won’t have to worry about pins backing out under recoil or during transport.
The finish isn’t just for show. The smooth stainless surface allows the pins to slip into place with less friction, and once seated, they sit flush against the receiver for a sleek, upgraded look. Whether you’re building out a full set of firearm accessories or just starting with a pin swap, these parts deliver a noticeable improvement in both fit and appearance.
Tools You’ll Need for a Scratch-Free Install
Before you start, gather a few simple tools to protect your shotgun’s finish and make the process effortless:
- Bench block or rolled duct tape: Elevate the receiver slightly off your work surface. This gives you clearance to drive pins out without marring the table or the firearm.
- Delrin tool or soft punch: A Delrin tool is ideal because it’s non-marring and won’t scratch the receiver or the new pins. A brass or nylon punch works if you don’t have Delrin, but avoid steel punches that can leave marks.
- Small hammer or armorer’s hammer: Light taps are all you need. You’re guiding pins, not forcing them.
Step-by-Step: Removing the OEM Trigger Pin
Start with the rear trigger pin. Locate the small dimpled hole on the top of the OEM pin—this is your contact point. Using your Delrin tool and hammer, gently tap the pin out about halfway. The goal is to partially displace it without fully removing it just yet.
With the OEM pin halfway out, take your NDZ Performance receiver pin and push it through the opposite side of the hole. As you advance the new pin, it will naturally push the factory pin the rest of the way out. You’ll feel a distinct click when the anti-walk notch engages and locks the pin in place. Check the opposite side to confirm the pin sits flush with the receiver. That flush fit is your visual confirmation that the notch has seated correctly.
Repeating the Process for the Front Pin
Move to the front receiver pin and follow the same sequence. Find the dimpled hole, tap the OEM pin out roughly halfway, then introduce your NDZ pin from the other side. Work the factory pin out gradually—there’s no need to rush. Once the new pin is fully seated and you hear that same audible click, use your Delrin tool to make any final micro-adjustments so both sides are perfectly flush.
Take a moment to inspect the receiver. The stainless or gold finish immediately adds a refined, custom look that complements other NDZ Performance upgrades, whether you’re coming from the world of custom Glock parts or building out a dedicated shotgun setup.
Durability and Everyday Use
These pins are built to handle long days at the range and the idle time in a safe without degradation. The deeper anti-walk notch isn’t just a machining detail—it’s a functional upgrade that keeps your trigger group secure during repeated fire. If you maintain or modify your own firearms, having reliable, well-fit pins simplifies future disassembly and reassembly.
For those who already trust NDZ Performance for firearm accessories on other platforms, this Remington 870 pin set delivers the same focus on precise fit and durable materials. It’s a straightforward install that pays off every time you handle the shotgun.