Hellcat Pro Magazine Compatibility Guide: Capacity, Plates and Extensions

17 min read

Springfield Armory’s Hellcat Pro and the original Hellcat share a name, a caliber, and a good deal of small hardware, but they do not share one single magazine family from top to bottom. This Hellcat Pro Magazine Compatibility Guide sorts out which magazines belong to which gun, and which NDZ base plates and finger extensions match each capacity. Two kinds of source are used here, and they answer two different questions. Springfield Armory’s own product pages and spec tables say which magazine goes in which pistol. The fitment fields and description blocks on the NDZ Performance product pages say which base plate goes on which magazine. Where neither answers a question, this guide says so instead of filling the gap with a guess.

The short answer

The Hellcat Pro has its own magazines. Springfield Armory publishes a model field on every Hellcat magazine it sells, and the split is clean: HC5910, HC5911, HC5913 and HC5915 all read Model: Hellcat, Hellcat RDP, while HCP5910, HCP5915 and HCP5917 all read Model: Hellcat Pro. Filtering Springfield’s own Hellcat magazine category to the Hellcat Pro returns only the HCP part numbers; filtering it to the Hellcat returns only the HC part numbers. No magazine in that catalog is listed for both guns. The NDZ pages point the same way from the other side: the 10-round Aspis plate carries an explicit Hellcat Pro exclusion in its description while the attribute fields on that same page list the Hellcat Pro, a contradiction covered below, and the 11-round and 13-round magazines are documented as Hellcat parts with no Pro listing attached to them at all.

NDZ lists its 15-round base plates as fitting the Hellcat, the Hellcat Pro, and the Hellcat Pro Comp. Read that for what it is: a statement about the plate. One 15-round plate covers the 15-round magazine of any of those three guns. It does not make HC5915 and HCP5915 the same magazine. They are separate Springfield part numbers carrying separate model listings, and the plate fitment says nothing about swapping a magazine between pistols.

If you own a Pro and you are shopping by capacity, Springfield builds three magazines for it: HCP5910 at 10 rounds, HCP5915 at 15, and HCP5917 at 17. If you own both guns and you were hoping to buy one box of magazines for the pair, none of that plan survives contact with the manufacturer’s catalog. Budget for two magazine families, and match a base plate to the magazine in your hand rather than to the pistol on your hip.

What each gun ships with

Springfield Armory prints a Magazines line in the spec table of every Hellcat and Hellcat Pro configuration, which is the cleanest answer to what comes in the box. It varies by configuration, so check the spec table for the exact model you bought.

  • Hellcat Pro OSP. (1) 15-Round, (1) 17-Round. The product page describes it as shipping with a flush-fitting 15-round magazine for concealability and an extended 17-rounder.
  • Hellcat Pro Comp OSP. (1) 15-Round, (1) 17-Round. The same pair as the standard Pro.
  • Hellcat Pro OSP 15-Round. (2) 15-Round. The Pro Comp has a matching 15-round configuration.
  • Hellcat Pro OSP Low Capacity. (2) 10-Round. The Pro Comp again matches.
  • Hellcat Micro-Compact OSP 9mm. (1) 11-Round, (1) 13-Round Extended. Different capacities, different part numbers, different gun.

The 17-round magazine is not an aftermarket curiosity or a rumor. Springfield announced it on September 1, 2023 as a factory magazine for the Hellcat Pro family, and it is now the extended magazine that ships with the gun.

Why the two guns split at the magazine

The Hellcat family is broader than two guns. The NDZ for Springfield Hellcat and Hellcat Pro Magazine Release lists its fitment as Hellcat, Hellcat Pro, Hellcat Pro Comp, Hellcat RDP, and Hellcat .380. That is five variants sharing one frame-side control.

Frame controls crossing over is normal. Magazines are where a longer grip stops being cosmetic and becomes dimensional: the magazine has to match the grip it lives in, and the floorplate that closes it out is cut for that specific body. That is why NDZ publishes a separate base plate for nearly every capacity in the line rather than one universal plate, and why each plate carries its own list of magazines it will not fit.

Read the exclusion lists rather than the product titles. A plate named for the Hellcat may still be cut only for one capacity within the Hellcat line, and the exclusion field is where that gets spelled out.

Magazine and base plate fitment table

The two right-hand columns describe base plates. A plate that lists the Hellcat Pro is a plate you can put on a Hellcat Pro magazine. It is not a statement that the magazine in the left column goes in a Hellcat Pro; that question is answered by the Springfield column, and only by the Springfield column.

MagazineCapacitySpringfield lists the magazine forNDZ base plate for that magazine bodyGun models the plate is listed for
Hellcat HC591010Hellcat, Hellcat RDPHCT9-MP10-V (flat), HCT9-MPF10-V (finger extension), HCT9-MPF10-AT-V (Aspis, finger extension)Hellcat, on all three. The Aspis plate then contradicts itself: its Gun Model attributes list Hellcat, Hellcat Pro, Hellcat Pro Comp and Hellcat RDP, while its description adds Does Not Fit: Hellcat Pro, as well as 11, 13, or 15 Round Hellcat Magazines
Hellcat HC591111Hellcat, Hellcat RDPHCT9-MP11-VHellcat 11 and 15 round magazines
Hellcat HC591313Hellcat, Hellcat RDPHCT9-MPF13-V (finger extension)Hellcat
Hellcat HC591515Hellcat, Hellcat RDPHCT9-MP15-V (flat), HCT9-MP15-AT-V (Aspis), HCT9-MP11-VHCT9-MP15-V and HCT9-MP15-AT-V: Hellcat, Hellcat Pro, Hellcat Pro Comp. HCT9-MP11-V is not one of them: its field reads Hellcat 11 and 15 round magazines, its spec table lists Gun Model: Hellcat, and the Pro and Pro Comp appear nowhere on that page
Hellcat Pro HCP591010Hellcat ProNot confirmedNot confirmed
Hellcat Pro HCP591515Hellcat ProHCT9-MP15-V (flat), HCT9-MP15-AT-V (Aspis)Hellcat, Hellcat Pro, Hellcat Pro Comp
Hellcat Pro HCP591717Hellcat ProNot confirmed. HCT9-MP11-V lists Does Not Fit: 10, 13, or 17 Round MagazinesNot confirmed
The Springfield column is the Model spec field read from each magazine’s own product page at Springfield Armory. The plate columns are the For Gun Model and Does Not Fit fields on each NDZ Performance product page, plus the description block on pages that state an exclusion there rather than in the field. HCT9-MPF10-AT-V is the one that does: its structured exclusion field names only the 11, 13, and 15 round magazines, and the Hellcat Pro exclusion appears in the description — while the Gun Model attributes on that same page include the Hellcat Pro. That listing contradicts itself and this guide does not pick a side. Cells marked Not confirmed are questions neither source answers.

Two capacities in that table deserve a closer look, because they are where most of the confusion in this platform lives.

The 15-round rows

Both 15-round plates state the cross-model fitment outright. The NDZ Magazine Base Plate for the Hellcat and Hellcat Pro 15 Round 9mm lists its models as Hellcat, Hellcat Pro, and Hellcat Pro Comp, and its exclusion field rules out only the 10 and 13 round magazines. The Aspis Cut version of the same plate repeats the model list and adds the 11-round magazine to its exclusions.

That is one plate listed against two different magazines. HC5915 is the base Hellcat’s 15-rounder and HCP5915 is the Pro’s, Springfield lists them for different guns, and NDZ still lists a single plate for the 15-round magazine on all three models. That overlap is why it is easy to talk yourself into thinking the magazines themselves interchange. Springfield does not list them as interchangeable, and neither site publishes a statement that they are.

The 10-round rows

This is the only place in the line where a product page names the Hellcat Pro in a negative, and it is also the one listing here that argues with itself. The Aspis Cut 10-round finger extension plate, HCT9-MPF10-AT-V, prints Does Not Fit: Hellcat Pro, as well as 11, 13, or 15 Round Hellcat Magazines in its description block. Its structured exclusion field stops at the 11, 13, and 15 round magazines. And its Gun Model attributes, the fields NDZ’s own storefront filter reads, carry four values: Hellcat, Hellcat Pro, Hellcat Pro Comp and Hellcat RDP.

Those two statements cannot both be right, and the disagreement is visible on the store itself. Filter the Hellcat parts page to Gun Model: Hellcat Pro and Product Type: Magazine Plate and this plate comes back alongside the two 15-round plates. This guide does not resolve it in either direction, because nothing published settles which field is correct. Worth noting, and labeled for what it is: its three sibling low-capacity plates — HCT9-MP10-V, HCT9-MPF10-V and HCT9-MPF13-V — each list Gun Model: Hellcat and nothing else, which suggests the extra values on the Aspis plate are a data-entry error rather than a fitment statement. That is inference from the neighboring listings, not a sourced fact. Ask NDZ before you buy this plate for a Hellcat Pro magazine.

Read the rest of it precisely as well. Whichever of those two fields is the correct one, both are statements about a base plate. Neither is a test result for whether a bare 10-round Hellcat magazine will seat and feed in a Pro. If that specific question is what you are trying to answer, treat it as open and confirm it with Springfield Armory.

There is a simpler route if 10 rounds is what you need in a Pro. Springfield sells a 10-round magazine built for that gun, HCP5910, described as having a flush fitting bottom that mates perfectly to your Hellcat Pro frame. No NDZ plate page read for this guide lists that body, so check with NDZ before assuming a plate exists for it.

Base plate, finger extension, extended magazine: three different things

People searching for an extended magazine for a Hellcat Pro are usually after one of three products, and they are not interchangeable.

  • A flat base plate. A direct replacement for the polymer floorplate the magazine shipped with, machined from anodized aluminum. It changes material, durability, and appearance. It does not change the footprint of the magazine or how much it holds.
  • A finger extension base plate. The same replacement part with grip length added below the magazine body. NDZ describes these as adding textured grip length so another finger can purchase against the gun, with ridges that guide the hand into position. The stated purpose is control and reduced muzzle flip, particularly on subcompact frames or for larger hands.
  • A higher-capacity magazine. A different magazine assembly with a longer body, a longer spring, and more rounds. This is a magazine purchase, not a floorplate purchase.

A base plate does not add rounds

This is worth stating plainly because the search term for it is ambiguous. The seven Hellcat plate pages word it three different ways. HCT9-MP15-V is the only one that says A direct replacement for the OEM piece. HCT9-MP10-V, HCT9-MP11-V and HCT9-MPF13-V describe replacing the OEM piece for a stronger anodized aluminum one. HCT9-MPF10-V, HCT9-MPF10-AT-V and HCT9-MP15-AT-V drop the OEM wording and call the part an upgrade over the stock base plate. What none of the seven claims is added capacity, and none should be bought expecting it.

A finger extension gives you somewhere to put your pinky. It buys grip, not rounds. If you want more rounds in a Hellcat Pro, you need a higher-capacity magazine, and Springfield’s answer is the 17-round HCP5917. Springfield describes it as sharing the same magazine body as the 15-round magazine, with an extended basepad that adds two rounds of capacity and carries the same Adaptive Grip Texture as the pistol. It is also offered with a Desert FDE basepad as HCP5917F. If your Pro shipped in the standard configuration, one is already in the case.

One warning does appear on every one of these product pages, word for word: Magazine Floor Base Plates & Extension Devices are secured by Spring Tension & can cause serious injury if improperly handled. NDZ Performance recommends the use of Safety Glasses when removing or installing this product. Wear the eye protection. Trapping the plate under a thumb as it slides off is ordinary handling practice for a spring-loaded floorplate and is general advice here, not something any of these NDZ pages prints.

Choosing a plate for a Hellcat Pro magazine

With a 15-round magazine in hand, NDZ lists two plates against the Hellcat Pro and a third that is cut for the 15-round body without naming the Pro anywhere. The choice among them is mostly about appearance and how much of the plate you want to see.

  • HCT9-MP15-V, the standard flat plate. Anodized aluminum in a range of finishes, and the version that accepts laser engraved artwork if you want the magazine marked.
  • HCT9-MP15-AT-V, the same plate with the Aspis cut profile. Same fitment, different face.
  • HCT9-MP11-V, listed for 11 and 15 round magazines. Useful if you keep both an 11-round and a 15-round magazine and want one plate design across the pair. Note that its field reads Hellcat 11 and 15 round magazines and its spec table lists Gun Model: Hellcat, so unlike the two 15-round plates it carries no Hellcat Pro listing at all.

All three are machined in the USA from anodized aluminum and carry a lifetime warranty against manufacturing defects. Note that HCT9-MP11-V is the plate whose exclusion list mentions a 17-round magazine, so if you are running the 17-round HCP5917, that plate is specifically not it.

If you also run a base Hellcat

Owners who carry the subcompact and shoot the Pro should plan on two separate stacks of magazines and two separate plate part numbers. The factory Springfield Hellcat 9mm 10 Round Magazine with Finger Extension is stainless steel with numbered witness holes and a black polymer follower. Springfield’s own page for that part, HC5910, describes a flush fit base for maximum concealability and adds that the magazine also includes a pinky extension, so the finger extension in the listing title is a floorplate that comes with the magazine rather than the only way it can be set up. Its listed gun model is Hellcat, and its exclusions are the EMP, XD, XD-M, and XD-S. It is a base Hellcat magazine.

For that magazine, the matching plates are HCT9-MP10-V for a flat profile and HCT9-MPF10-V or HCT9-MPF10-AT-V if you want the finger extension in aluminum. For a 13-round Hellcat magazine, the finger extension plate is HCT9-MPF13-V, which excludes the 10 and 15 round bodies.

One part that genuinely covers both guns

The magazine release is the exception. NDZ lists one release across Hellcat, Hellcat Pro, Hellcat Pro Comp, Hellcat RDP, and Hellcat .380, in Standard, Plus, and Extended button lengths. It is a two-piece aluminum and stainless assembly, and the size options exist so you can tune how far the button stands off the frame.

If your complaint about the Pro is that you have to break grip to drop a magazine, the release is the part to look at before you start buying magazines. The rest of the Hellcat line is on the Springfield Armory Hellcat parts page.

What this guide could not confirm

Two questions came up that the available data does not settle, and they are listed here rather than answered by inference.

  • Whether 11-round and 13-round Hellcat magazines physically function in a Pro. Both are documented as Hellcat magazines. Neither carries a Hellcat Pro listing, and neither carries an explicit Pro exclusion. That is genuinely silent, not a quiet no.
  • Whether a bare 10-round Hellcat magazine will seat and feed in a Pro. HC5910 is listed for the Hellcat and the Hellcat RDP and nothing else, and Springfield publishes no statement either way about putting one in a Pro. The NDZ exclusion that names the Hellcat Pro is a statement about a base plate, not a test of the magazine in the gun, and that listing contradicts its own attribute fields. If you want 10 rounds in a Pro, HCP5910 is the part number Springfield builds for it.

If a magazine will not seat, will not lock the slide back, or drops free under recoil, stop using it and confirm the part number with Springfield Armory before you carry the gun.

Frequently asked questions

Do base Hellcat magazines fit the Hellcat Pro?

Springfield Armory does not list any of them for it. HC5910, HC5911, HC5913 and HC5915 all carry the model field Hellcat, Hellcat RDP, and the Hellcat Pro magazines are their own part numbers: HCP5910, HCP5915 and HCP5917, all listed for the Hellcat Pro. Filtering Springfield’s Hellcat magazine category to the Hellcat Pro returns only those Pro parts. NDZ prints Does Not Fit: Hellcat Pro in the description of the 10-round Aspis base plate, though the attribute fields on that same page list the Hellcat Pro, so treat that one listing as contradictory. The 11-round and 13-round magazines carry no Pro listing either way.

Which magazine capacity does NDZ list a Hellcat Pro base plate for?

Two capacities, and one of them is contradictory. Filtering NDZ’s own Hellcat parts page to Gun Model: Hellcat Pro and Product Type: Magazine Plate returns three plates, not two. Two are the 15-round plates, HCT9-MP15-V and HCT9-MP15-AT-V, and both read For Gun Model: Hellcat, Hellcat Pro, Hellcat Pro Comp. The third is HCT9-MPF10-AT-V, the 10-round finger extension plate, which is in that result because its Gun Model attributes list Hellcat, Hellcat Pro, Hellcat Pro Comp and Hellcat RDP while its description reads Does Not Fit: Hellcat Pro, as well as 11, 13, or 15 Round Hellcat Magazines. The two 15-round plates are the settled answer. Ask NDZ about the 10-round Aspis plate before buying it for a Pro.

Does an NDZ base plate increase magazine capacity?

No. The seven Hellcat plate pages word it three ways. HCT9-MP15-V calls itself a direct replacement for the OEM piece. HCT9-MP10-V, HCT9-MP11-V and HCT9-MPF13-V describe replacing the OEM piece for a stronger anodized aluminum one. HCT9-MPF10-V, HCT9-MPF10-AT-V and HCT9-MP15-AT-V call the part an upgrade over the stock base plate. Not one of the seven claims added capacity. Finger extension models add grip length below the magazine, not rounds inside it. To gain capacity you need a higher-capacity magazine assembly.

What is the difference between a base plate and a finger extension?

A flat base plate replaces the factory floorplate in anodized aluminum and keeps the magazine footprint the same. A finger extension base plate adds textured grip length below the magazine so another finger can purchase against the gun, which helps control and muzzle flip on compact frames or for larger hands.

Will a 10-round Hellcat base plate fit a Hellcat Pro magazine?

The listings do not settle it. HCT9-MP10-V and HCT9-MPF10-V both read For Gun Model: Hellcat with Does Not Fit: 11, 13, or 15 Round Magazines. That rules out the taller Hellcat bodies and says nothing at all about HCP5910, the 10-round magazine Springfield builds for the Pro. The Aspis version, HCT9-MPF10-AT-V, contradicts itself: its description reads Does Not Fit: Hellcat Pro, as well as 11, 13, or 15 Round Hellcat Magazines, while its Gun Model attributes list Hellcat, Hellcat Pro, Hellcat Pro Comp and Hellcat RDP. Confirm with NDZ before ordering a 10-round plate for a Hellcat Pro magazine.

Is there a 17-round Hellcat Pro magazine?

Yes. Springfield Armory sells it as HCP5917, listed for the Hellcat Pro with a capacity of 17, and it ships in the box with the standard Hellcat Pro and the Hellcat Pro Comp alongside a 15-round magazine. Springfield announced it on September 1, 2023 and also offers it with a Desert FDE basepad as HCP5917F. There is no 17-round magazine listed for the base Hellcat, and the one NDZ plate that mentions a 17-round magazine, HCT9-MP11-V, lists it as an exclusion.

NDZ Performance is a U.S.-based manufacturer of aftermarket firearm accessories and parts, founded by David Dziob and Antonin Blazek in 2004 and headquartered in Cheshire, Connecticut. Operating a fully equipped in-house CNC shop with 3D printing, CNC milling, lathes, and laser engraving, NDZ produces custom and performance upgrade parts for Glock, Sig Sauer, Smith & Wesson, Springfield Armory, Ruger, CZ, Beretta, Mossberg, Remington, AR-15, AK-47, and more — including guide rods, custom slides, slide cover plates, and magazine base plates. Articles on this blog share product insights, installation guides, and real-world testing to help shooters make informed upgrade decisions.

Leave a Reply